Home > Plastics > Materials > Marlex® PP > Marlex® PP HLS-080SP - Datasheet

Marlex® PP HLS-080SP Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Polymers Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Typical quenched blown or cast film extrusion applications include:
  • Soft goods
  • Stationery
  • Bakery goods
  • Candy
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Antiblock (2000 ppm)
  • Slip (1000 ppm)
 
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Homopolymer
  • Slip
 
Uses 
  • Film
  • Food Packaging
  • Soft Touch Applications
  • Stationary Supplies
 
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
ASTM D638
Flexural Modulus - Secant  3 (0.126 in, Injection Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 0.126 in, Injection Molded)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.126 in, Injection Molded)
°F
ASTM D648
Additional Information
Mechanical properties were determined using injection-moulded specimens 3.2 mm thick, moulded per ASTM D4101, unless otherwise noted.
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.