IDES Prospector Already have an account? Login Here

Shincor LIM KE-1938 Data Sheet

Silicone

Supplied by Shincor Silicones, Inc.

Home > Plastics > Shincor LIM > Shincor LIM KE-1938 Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Values for Compression Set are for a specimen molded 5 minutes at 120°C and post cured at 200°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • Heat Cure
  • High Hardness
  • Low Viscosity
  
Uses 
  • Caps
  • Computer Components
  • Connectors
  • Conveyor Parts
  • Diaphrams
  • Electrical Parts
  • Seals
Appearance 
  • Light Brown
Forms 
  • Liquid
Processing Method 
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Compression Set (356°F)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Shelf Life (90°F)
wk
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time (248°F)
min
  
Post Cure Time (302°F)
hr
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-1938, Shincor LIM KE1938, Shincor LIM , ShincorLIMKE1938, ShincorLIM, KE, LIMKE-1938, LIMKE1938, LIMKE:1938, LIMKE/1938, LIMKE+1938, LIMKE_1938, LIMKE 1938, LIMKE, KE-1938, KE1938, KE:1938, KE/1938, KE+1938, KE_1938, KE 1938, Silicone, Shincor Sil, 1938KE, 1938LIMKE
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Heat Cure, High Hardness, Hard, Low Viscosity.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Computer Components, Computer Parts, Conveyor Parts, Conveyor Components.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.