Home > Plastics > Materials > SABIC® Vestolen A > SABIC® Vestolen A RELY 5924R 10000 - Datasheet

SABIC® Vestolen A RELY 5924R 10000 Data Sheet

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® Vestolen A RELY 5924R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass.
Due to a superior low sagging behaviour of this material it is particularly suitable for the production of thick walled (large diameter and low SDR) pipes and shows excellent processing behaviour. This material offers security when used for gas and drinking water piping. The material has a high resistance to long-term loading and a high resistance to rapid crack propagation. Owing to a special stabilisation package, good organoleptic properties are ensured with grade RELY 5924R 10000. This material meets (inter)national standards for use in gas, drinking water and waste water piping.
MRS class ISO 12162 MPa = 10.0 (PE 100).

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Carbon Black (2%)
Features 
  • Bimodal Molecular Weight Distribution
  • Good Crack Resistance
  • Good Organoleptic Properties
  • High Density
 
Uses 
  • Piping
Appearance 
  • Black
Processing Method 
  • Pipe Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/2.16 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Carbon Black Content
%
ISO 6964
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Stress (Yield, 0.0787 in, Compression Molded)
psi
ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)
%
ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F, Compression Molded
ft·lb/in²
 
73°F, Compression Molded
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Melting Temperature (DSC)
°F
DIN 53765
Oxidation Induction Time (410°F)
min
ISO 11357-6
Additional Information
Nominal Value
Unit
Test Method
MRS Classification
psi
ISO 12162
RAL Number
 
 
Features
Features may also be described by the following terms: Good Crack Resistance, Crack Resistant, High Density, High Specific Gravity, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution, Good Organoleptic Properties.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.