Home > Plastics > Materials > Hostacom > Hostacom ERC 213N - Datasheet

Hostacom ERC 213N Datasheet

Polypropylene Copolymer

15% Mineral

Supplied by LyondellBasell Industries

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Hostacom ERC 213N is a UV stabilised, 15 % mineral filled polypropylene copolymer for injection moulding. It combines a good flowability with excellent stiffness/impact properties. The grade has been specifically designed for interior trim applications with higher impact and scratch resistance requirements.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Filler / Reinforcement 
  • Mineral, 15% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Copolymer
  • Good Flow
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • High Impact Resistance
  • Medium Gloss
  • Scratch Resistant
Uses 
  • Automotive Applications
  • Automotive Interior Trim
 
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
ISO 527-2/50
Flexural Modulus - Secant (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/1A
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel
Features
Features may also be described by the following terms: Good Flow, High Impact Resistance, Good Stiffness, Medium Gloss, Good Processability, Easy Processing, Scratch Resistant, Resists Scratches, Good Surface Finish.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).
Available Documents
Processing - Extrusion (English)
Processing - Injection Molding (English)
Processing - Mold Shrink (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.