Home > Plastics > Materials > Mold Max® > Mold Max® 30 - Datasheet

Mold Max® 30 Data Sheet

Silicone

Supplied by Smooth-On, Inc

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin).

Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Uses 
  • Modeling Material
  • Prototyping
 
Appearance 
  • Pink
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D1475
Specific Volume
in³/lb
ASTM D1475
Molding Shrinkage - Flow
in/in
ASTM D2566
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
ASTM D412
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength 2
lbf/in
ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Pot Life
min
 
Thermoset Mix Viscosity
cP
ASTM D2393
Demold Time
min
 
Additional Information
Nominal Value
Unit
Test Method
Mixing Ratio
 
 
Operating Temperature
°F
 
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Die B
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.