Home > Plastics > Materials > Purell > Purell 1810 E WHITE 93410 - Datasheet

Purell 1810 E WHITE 93410 Data Sheet

Low Density Polyethylene

Supplied by ALBIS PLASTIC GmbH

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Purell 1810 E WHITE 93410 is a Low Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Uses 
  • Blow Molding Applications
Appearance 
  • White
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
DIN 53505
Ball Indentation Hardness (H 49/30)
psi
DIN 53456
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A50
Melting Temperature
°F
ISO 11357-3
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.