| Product Description | ||||
|
Alathon H4262 is a high-flow resin that exhibits very good cold temperature impact performance, optimum processing and thermal stability, with good color and organoleptic properties. Typical customer applications include rigid food packaging such as four, five and six-quart ice cream containers produced at high speeds in fast-cycling, multi-cavity stack molds.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Agency Ratings
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Apparent Density
|
|
g/cm³
|
ASTM D1895 |
|
Melt Mass-Flow Rate (MFR)
|
|
g/10 min
|
ASTM D1238 |
|
Spiral Flow 2 (440°F)
|
|
in
|
|
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus 3
|
ASTM D638 | ||
|
--
|
|
psi
|
|
|
1% Secant
|
|
psi
|
|
|
Tensile Elongation 4 (Break)
|
|
%
|
ASTM D638 |
|
Flexural Modulus 5
|
ASTM D790 | ||
|
--
|
|
psi
|
|
|
1% Secant
|
|
psi
|
|
|
2% Secant
|
|
psi
|
|
|
Flexural Strength 6 (Break)
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
|
Unnotched Izod Impact (0°F)
|
|
|
ASTM D4812 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore D)
|
|
|
ASTM D2240 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load (66 psi, Unannealed)
|
|
°F
|
ASTM D648 |
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
Peak Melting Temperature
|
|
°F
|
ASTM D3418 |
|
Peak Crystallization Temperature (DSC)
|
|
°F
|
ASTM D3418 |
| Related Terminology | |||
|
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, BasselProduct names can be difficult to match. You may have searched any one of these terms to find this product: Alathon® ETP H4262, Alathon ETP H4262, Alathon® ETP , Alathon ETP, AlathonETPH4262, AlathonETP, ETPH 4262, ETPH4262, ETP, H 4262, H4262, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 4262H, 4262ETPH
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Colorability, High Flow, High Melt, High MFI, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Organoleptic Properties, Good Processing Stability, Good Process Stability, Good Thermal Stability, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Food Containers, Food Container, Thin-Walled Containers, Thin-Walled Container, Thin-Wall Containers, Thin-Wall Container, Thinwall Containers, Thinwall Container.
|
|||
| Agency Ratings | |||
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|
|||
| Extrusion |
Nominal Value
|
Unit
|
|
|
Cylinder Zone 1 Temp.
|
|
°F
|
|
|
Cylinder Zone 2 Temp.
|
|
°F
|
|
|
Cylinder Zone 3 Temp.
|
|
°F
|
|
|
Cylinder Zone 4 Temp.
|
|
°F
|
|
|
Cylinder Zone 5 Temp.
|
|
°F
|
|
|
Adapter Temperature
|
|
°F
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Measures the number of inches of flow produced when molten resin is injected into a long, spiral channel (0.0625" insert), at a constant injection pressure of 1000 psi with a melt temperature of 440°F. |
| 3Type I, 2.0 in/min |
| 4Type IV, 2.0 in/min |
| 50.49 in/min |
| 62.0 in/min |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |