IDES Prospector Already have an account? Login Here

DJSilicone NE-9260 Data Sheet

Silicone

Supplied by DONGJUE SILICONE (NANJING) CO., LTD

Home > Plastics > DJSilicone > DJSilicone NE-9260 Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Character: Excellent extrusion properties and yellowing resistance

Application: NE-92 is suitable for all kinds of silicone rubber tubes for food processing, medical use and E-tube with high transparency requirements, of which the extruded tubes and wires are smooth-faced.
E.g. milk pipe, rubber strip, and medical tube
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Color Stability
  • High Clarity
  
Uses 
  • Medical/Healthcare Applications
  • Non-specific Food Applications
  • Tubing
  • Wire & Cable Applications
  
Appearance 
  • Translucent
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Elastomers
Nominal Value
Unit
Test Method
Tensile Set
%
 ASTM D412
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DJSilicone NE-9260, DJSilicone NE9260, DJSilicone , DJSiliconeNE9260, NE, NE-9260, NE9260, NE:9260, NE/9260, NE+9260, NE_9260, NE 9260, Silicone, DONGJUE SILICONE , 9260NE
Features
Features may also be described by the following terms: Good Color Stability, High Clarity.
Uses
Uses may also be described by the following terms: Tubing, Tube, Medical Applications, Food Applications, Wire and Cable Applications, Wire & Cable Applications.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.