Home > Plastics > Materials > Jam PE > Jam PE 25525 - Datasheet

Jam PE 25525 Data Sheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Jam PE 25525 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East. Typical application: Caps/Lids/Closures. Primary characteristic: butene comonomer.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Butene Comonomer
Uses 
  • Lids
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield, Compression Molded
psi
 
Break, Compression Molded
psi
 
Tensile Elongation (Break, Compression Molded)
%
ASTM D638
Flexural Modulus (Compression Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
 
ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Features
Features may also be described by the following terms: Butene Comonomer.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.