Home > Plastics > Materials > Jam PE > Jam PE 14Y01 - Datasheet

Jam PE 14Y01 Data Sheet

Linear Low Density Polyethylene

Supplied by Jam Petrochemical Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Jam PE 14Y01 is a Linear Low Density Polyethylene product. It is available in Africa & Middle East. Typical application: Film.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Uses 
  • Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Flow Rate Ratio
 
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Strength
    ASTM D882
MD : Yield, 0.98 mil, Blown Film
psi
 
TD : Yield, 0.98 mil, Blown Film
psi
 
MD : Break, 0.98 mil, Blown Film
psi
 
TD : Break, 0.98 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 0.98 mil, Blown Film
%
 
TD : Break, 0.98 mil, Blown Film
%
 
Dart Drop Impact (0.98 mil, Blown Film)
g
ASTM D1709A
Elmendorf Tear Strength
    ASTM D1922
MD : 0.98 mil, Blown Film
g
 
TD : 0.98 mil, Blown Film
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
ASTM D1790
Haze (0.984 mil, Blown Film)
%
ASTM D1003
Yellowness Index (0.000984 in)
YI
ASTM D1925
Additional Information
Nominal Value
Unit
Test Method
Fish Eye
No./m²
 
Titanium
ppm
 
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.