| Product Description | ||||
|
CORENE® N2220 is a low density polyethylene resin with a high flow and very good flexiblity. It is mainly used for compound and masterbatch applications.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Forms
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D638 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore D)
|
|
|
ASTM D2240 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
Peak Melting Temperature
|
|
°F
|
ASTM D3418 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: ICORENE® N2220, ICORENE N2220, ICORENE® , ICORENE, ICORENEN2220, N 2220, N2220, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, ICO Europe, PolyethyleneLowDensity, 2220N
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Flexibility, Flexible, High Flow, High Melt, High MFI.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Compounding, Compounds.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |