| Product Description | ||||
|
SABIC® PP 526K is a grade developed for efficient thermoforming. The additive package is designed for optimum balanced production properties. SABIC® PP 526K is formulated with a combined processing, antistatic and nucleator package of the next generation, giving it the best performance possible. The nucleator technology provides higher stiffness and good transparency/gloss in the thermoformed part. The fact that the polymer/additive package gives higher isotropic processing behaviour reduces warpage, ovality and other dimensional problems,making this grade unique and ideally suited for productivity improvements.
SABIC® PP 526K is typically used for various thermoformed parts sensitive to dimensional stability. Customers use this grade as natural or coloured, ranging from food containers to disposables, yellow fats and lids. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress
|
ISO 527-2 | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 180/4A |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (66 psi, Unannealed)
|
|
°F
|
ISO 75-2/B |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A |
|
--
|
|
°F
|
ISO 306/B |
|
Melting Temperature (DSC)
|
|
°F
|
Internal Method |
| Additional Information | |||
|
Isotacticity - High
|
|||
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 526K, SABIC PP 526K, SABIC® PP , SABIC PP, SABICPP526K, SABICPP, PP 526 K, PP526K, PP526, PP, 526 K, 526K, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, SABIC, PolypropyleneHomopolymer, PPHomopolymer, K526, 526PP
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Stiffness, Warp Resistant, Warpage Resistant, High Isotactic, High Isotacticity, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Food Containers, Food Container.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |