| Product Description | ||||
|
Amodel AE-4133 is a 33% glass reinforced, hot-water moldable polyphthalamide (PPA) designed to work in the modern automotive electrical environment.
This grade features a high heat deflection temperature, high flexural modulus and high tensile strength, as well as excellent creep resistance and low moisture absorption.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
RoHS Compliance
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Density
|
|
--
|
g/cm³
|
ISO 1183/A |
|
Molding Shrinkage
|
ASTM D955 | |||
|
Flow
|
|
--
|
in/in
|
|
|
Across Flow
|
|
--
|
in/in
|
|
|
Water Absorption (24 hr)
|
|
--
|
%
|
ASTM D570 |
| Mechanical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Tensile Modulus (73°F)
|
|
--
|
psi
|
ISO 527-2 |
|
Tensile Stress (Break, 73°F)
|
|
--
|
psi
|
ISO 527-2 |
|
Tensile Strain (Break, 73°F)
|
|
--
|
%
|
ISO 527-2 |
|
Flexural Modulus (73°F)
|
|
--
|
psi
|
ISO 178 |
|
Flexural Strength (73°F)
|
|
--
|
psi
|
ISO 178 |
|
Flexural Strain
|
|
--
|
%
|
ISO 178 |
| Impact |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (73°F)
|
|
--
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength (73°F)
|
|
--
|
ft·lb/in²
|
ISO 179/1eU |
|
Notched Izod Impact Strength (73°F)
|
|
--
|
ft·lb/in²
|
ISO 180/1A |
|
Unnotched Izod Impact Strength (73°F)
|
|
--
|
ft·lb/in²
|
ISO 180/1U |
| Thermal |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
--
|
°F
|
ISO 75-2/A |
|
Glass Transition Temperature (DSC)
|
|
--
|
°F
|
DSC |
|
Melting Temperature
|
|
--
|
°F
|
ISO 11357-3 |
|
CLTE
|
ASTM E831 | |||
|
Flow: 32 to 212°F
|
|
--
|
in/in/°F
|
|
|
Flow: 212 to 392°F
|
|
--
|
in/in/°F
|
|
|
Transverse: 32 to 212°F
|
|
--
|
in/in/°F
|
|
|
Transverse: 212 to 392°F
|
|
--
|
in/in/°F
|
|
| Electrical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Volume Resistivity
|
|
|
ohm·cm
|
ASTM D257 |
|
Dielectric Strength (0.126 in)
|
|
|
V/mil
|
ASTM D149 |
|
Dielectric Constant
|
ASTM D150 | |||
|
60 Hz
|
|
|
|
|
|
1 MHz
|
|
|
|
|
|
Dissipation Factor
|
ASTM D150 | |||
|
60 Hz
|
|
|
|
|
|
1 MHz
|
|
|
|
|
|
Comparative Tracking Index (CTI)
|
|
|
V
|
UL 746 |
|
High Voltage Arc Tracking Rate (HVTR)
|
|
|
in/min
|
UL 746 |
| Flammability |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Flame Rating 2 (0.126 in)
|
|
--
|
|
UL 94 |
| Related Terminology | ||||
|
Dry
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® AE-4133, Amodel AE4133, Amodel® , Amodel, AmodelAE4133, AE, AE-4133, AE4133, AE:4133, AE/4133, AE+4133, AE_4133, AE 4133, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 4133AE
|
|||
| Features | ||||
|
Dry
|
Features may also be described by the following terms: High Temperature Strength, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Stiffness, Good Creep Resistance, Creep Resistant, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Heat Resistance, Good Stiffness, High Strength.
|
|||
| Uses | ||||
|
Dry
|
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
|
|||
|
Conditioned
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® AE-4133, Amodel AE4133, Amodel® , Amodel, AmodelAE4133, AE, AE-4133, AE4133, AE:4133, AE/4133, AE+4133, AE_4133, AE 4133, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 4133AE
|
|||
| Injection |
Dry
|
Unit
|
|
|
Drying Temperature
|
|
°F
|
|
|
Drying Time
|
|
hr
|
|
|
Suggested Max Moisture
|
|
%
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Processing (Melt) Temp
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
| Injection Notes | |||
|
Injection Rate: 3-4 inch/second (7.5-10 cm/sec)
Holding Pressure: 50% of injection pressure |
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |