| Product Description | ||||
|
SABIC® Vestolen A 4062R 62437 (yellow) is a high density polyethylene (HDPE). With it's colour similar to RAL 1018 it is designed for coextrusion of yellow identification stripes on gas pipes out of SABIC® Vestolen A 4062R black . It is fully stabilized against UV- and thermal degradation.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Agency Ratings
|
|
|||
|
Appearance
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
|
|
g/10 min
|
ISO 1133 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Oxidation Induction Time (410°F)
|
|
min
|
ISO 11357-6 |
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Color Number - RAL
|
|
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen A 4062R 62437, SABIC Vestolen A 4062R 62437, SABIC® Vestolen A , SABIC Vestolen A, SABICVestolenA4062R62437, SABICVestolenA, A 4062 R 62437, A4062R 62437, A4062, 4062 R 62437, A4062R62437, 4062R 62437, 4062R, R62437, 4062R62437, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SABIC, PolyethyleneHighDensity, R4062, 4062A
|
|||
| Features | |||
|
Features may also be described by the following terms: High Density, High Specific Gravity, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Thermal Stability.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Piping, Pipe.
|
|||
| Agency Ratings | |||
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): PPI (2).
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |