IDES Prospector Already have an account? Login Here

Amodel® A-1145 DW Data Sheet

Polyphthalamide

Glass Fiber Reinforcement, 45%

Supplied by Solvay Specialty Polymers

Home > Plastics > Amodel® > Amodel® A-1145 DW Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Amodel A-1145 DW is a 45% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional.

This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom.

  • Natural: A-1145 NT DW
  • Black: A-1145 BK 937 DW
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 45% Filler by Weight
Features 
  • Chlorine Resistant
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Stiffness
  • High Stiffness
  • High Strength
  • High Temperature Strength
  • Low Moisture Absorption
Uses 
  • Appliances
  • Consumer Applications
  • Filters
  • Housings
  • Industrial Applications
  • Plumbing Parts
  • Pump Parts
  • Valves/Valve Parts
Agency Ratings 
  •  1
RoHS Compliance 
Appearance 
  • Black
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® A-1145 DW, Amodel A1145 DW, Amodel® , Amodel, AmodelA1145DW, A-1145 DW, A1145 DW, A:1145 DW, A/1145 DW, A+1145 DW, A_1145 DW, A 1145 DW, A1145, 1145DW, A1145DW, A_1145DW, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 1145A
Features
Features may also be described by the following terms: High Stiffness, High Temperature Strength, Good Creep Resistance, Creep Resistant, Chlorine Resistant, Chlorine Resistance, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, Good Stiffness, High Strength.
Uses
Uses may also be described by the following terms: Housings, Housing, Valves, Valve Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): NSF (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Tested at 82 °C (180 °F) (Commercial Hot)
2Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.