| Product Description | ||||
|
15% glass fibre reinforced PP copolymer compound; chemically coupled; blow molding grade; contains metal deactivator; heat stabilised
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Processing Method
|
|
|||
|
Resin ID (ISO 1043)
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
|
|
in³/10min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus
|
|
psi
|
ISO 527-2/1A/1 |
|
Tensile Stress (Break)
|
|
psi
|
ISO 527-2/1A/5 |
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2/1A/5 |
|
Flexural Modulus 2
|
|
psi
|
ISO 178 |
|
Flexural Strength 2
|
ISO 178 | ||
|
3.5% Strain
|
|
psi
|
|
|
6.0% Strain
|
|
psi
|
|
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179/1eA | ||
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Charpy Unnotched Impact Strength
|
ISO 179/1eU | ||
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Ball Indentation Hardness (H 358/10)
|
|
psi
|
ISO 2039-1 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature
|
|||
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/Bf |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/Af |
|
Vicat Softening Temperature
|
|||
|
--
|
|
°F
|
ISO 306/A50 |
|
--
|
|
°F
|
ISO 306/B50 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Burning Rate (0.0591 in)
|
|
in/min
|
ISO 3795 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FIPP 15 GFC BM K2258, POLYFORT FIPP 15 GFC BM K2258, POLYFORT® , POLYFORT, POLYFORTFIPP15GFCBMK2258, FIPP 15 GFC BM K 2258, FIPP 15 GFC BM K2258, FIPP15, 15GFC, GFCBM, BMK, K2258, FIPP15GFCBMK2258, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneCopolymer, PPCopolymer, 15FIPP
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 20.079 in/min |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |