Home > Plastics > Materials > POLYFORT® > POLYFORT® FIPP 20 T LE K1731 - Datasheet

POLYFORT® FIPP 20 T LE K1731 Data Sheet

Polypropylene Copolymer

20% Talc

Supplied by A. Schulman Europe

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
20% talc filled PP-Copolymer with low emission; UV- and high heat stabilized
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Talc, 20% Filler by Weight
Features 
  • Low Emissions
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
ISO 3795
Flammability Classification
    IEC 60695-11-10, -20
0,0591 in
 
 
0,118 in
 
 
Additional Information
1.) Not for use in food contact applications
2.) Not for use in medical or pharmaceutical applications
Features
Features may also be described by the following terms: Low Emissions.
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.