IDES Prospector Already have an account? Login Here

Quattor® HS-54070 V1 Data Sheet

High Density (HMW) Polyethylene

Supplied by Quattor Petroquímica

Home > Plastics > Quattor® > Quattor® HS-54070 V1 Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
QUATTOR® HS-54070 V1 is a high molecular weight high-density polyethylene, hexene copolymer, produced through Unipol® process and recommended for use in drums up to 200 liters for chemical and agricultural products and in Intermediate Bulk Containers (IBC).

Drums produced with QUATTOR® HS-54070 V1 exhibit excellent wall thickness uniformity, an improved balance between stiffness and impact, high environmental stress cracking resistance (ESCR) and extended weathering resistance.

Applications: drums up to 200 liters for food, chemical and agricultural products; intermediate bulk container (IBC).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Additive 
  • UV Stabilizer
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Good Weather Resistance
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
Uses 
  • Agricultural Applications
  • Containers
  • Drums
Agency Ratings 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Flexural Modulus
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® HS-54070 V1, Quattor HS54070 V1, Quattor® , Quattor, QuattorHS54070V1, HS, HS 54070 V 1, HS-54070 V1, HS54070 V1, HS:54070 V1, HS/54070 V1, HS+54070 V1, HS_54070 V1, HS 54070 V1, HS54070, 54070V, V1, HS54070V1, Polyethylene, High Density, Polyethylene High Density, HS_54070V1, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, Quattor Petroquimica, PolyethyleneHighDensityHMW, HDPEHMW, 54070HS
Features
Features may also be described by the following terms: Hexene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Good Stiffness, Good Weather Resistance, Weather Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ANVISA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Head/Die Temperature: 210°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.