| Product Description | ||||
|
QUATTOR® HS-51030 is a high molecular weight high-density polyethylene, hexene copolymer, produced through Unipol® process and recommended for use in drums from 200 liters, including L-ring drums.
Containers produced using QUATTOR® HS-51030 exhibit an improved top load and impact resistance, excellent stress cracking resistance (ESCR) and good wall thickness uniformity during processing. Applications: L-ring drums and high volume drums. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, F50)
|
|
hr
|
ASTM D1693B |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength
|
ASTM D638 | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Elongation
|
ASTM D638 | ||
|
Yield
|
|
%
|
|
|
Break
|
|
%
|
|
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Unnotched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore D)
|
|
|
ASTM D2240 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load (66 psi, Unannealed)
|
|
°F
|
ASTM D648 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® HS-51030, Quattor HS51030, Quattor® , Quattor, QuattorHS51030, HS, HS-51030, HS51030, HS:51030, HS/51030, HS+51030, HS_51030, HS 51030, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, Quattor Petroquimica, PolyethyleneHighDensityHMW, HDPEHMW, 51030HS
|
|||
| Features | |||
|
Features may also be described by the following terms: Hexene Comonomer, High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
| Injection Notes | |||
|
Head/Die Temperature: 200 to 220°C
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |