| Product Description | ||||
|
Quattor® HC-18028 is a linear low density polyethylene, hexene copolymer, produced through Unipol® process and recommended for cast film.
Stretch films produced using Quattor® HC-18028 have high load retention, outstanding puncture and tear resistance and excellent optical properties and are recommended for automatic application.. Applications: stretch film for automatic applications. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
| Films |
Nominal Value
|
Unit
|
Test Method
|
|
Film Thickness - Tested
|
|
mil
|
|
|
Tensile Strength
|
ASTM D882 | ||
|
MD: Yield, 0.98 mil
|
|
psi
|
|
|
TD: Yield, 0.98 mil
|
|
psi
|
|
|
MD: Break, 0.98 mil
|
|
psi
|
|
|
TD: Break, 0.98 mil
|
|
psi
|
|
|
Tensile Elongation
|
ASTM D882 | ||
|
MD: Break, 0.98 mil
|
|
%
|
|
|
TD: Break, 0.98 mil
|
|
%
|
|
|
Dart Drop Impact (0.98 mil)
|
|
g
|
ASTM D1709 |
|
Elmendorf Tear Strength
|
ASTM D1922 | ||
|
MD: 0.98 mil
|
|
g
|
|
|
TD: 0.98 mil
|
|
g
|
|
| Optical |
Nominal Value
|
Unit
|
Test Method
|
|
Gloss (45°)
|
|
|
ASTM D2457 |
|
Haze
|
|
%
|
ASTM D1003 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® HC-18028, Quattor HC18028, Quattor® , Quattor, QuattorHC18028, HC, HC-18028, HC18028, HC:18028, HC/18028, HC+18028, HC_18028, HC 18028, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneLinearLowDensity, 18028HC
|
|||
| Features | |||
|
Features may also be described by the following terms: Hexene Comonomer, Good Puncture Resistance, Puncture Resistant, Good Tear Strength.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Cast Film, Stretch Wrap.
|
|||
| Extrusion |
Nominal Value
|
Unit
|
|
|
Cylinder Zone 1 Temp.
|
|
°F
|
|
|
Cylinder Zone 2 Temp.
|
|
°F
|
|
|
Cylinder Zone 3 Temp.
|
|
°F
|
|
|
Cylinder Zone 4 Temp.
|
|
°F
|
|
|
Cylinder Zone 5 Temp.
|
|
°F
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |