| Product Description | ||||
|
Greenflex® MH 40 is an Ethylene Vinyl Acetate copolymer resin (EVA) for injection moulding and extrusion.
Items produced with Greenflex® MH 40 show high elasticity and good mechanical properties. Greenflex® MH 40 is recommended for the production flexible items, foamed crosslinked sheets for shoes. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Vinyl Acetate Content
|
|
wt%
|
Internal Method |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress (Yield, Injection Molded)
|
|
psi
|
ISO 527-2 |
|
Flexural Modulus (Injection Molded)
|
|
psi
|
ISO 178 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness
|
ISO 868 | ||
|
Shore A, Injection Molded
|
|
|
|
|
Shore D, Injection Molded
|
|
|
|
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Brittleness Temperature
|
|
°F
|
ASTM D746 |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A |
|
Melting Temperature
|
|
°F
|
Internal Method |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Greenflex® MH 40, Greenflex MH 40, Greenflex® , Greenflex, GreenflexMH40, MH 40, MH40, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Versalis, EthyleneVinylAcetateCopolymer, 40MH
|
|||
| Features | |||
|
Features may also be described by the following terms: High Elasticity, Highly Elastic.
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Processing (Melt) Temp
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |