Home > Plastics > Materials > Hifax > Hifax EP 3080G - Datasheet

Hifax EP 3080G Datasheet

Polypropylene Impact Copolymer

Supplied by LyondellBasell Industries

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Hifax EP 3080G is non-filled polypropylene copolymer for injection molding with very high impact strength. The grade has good UV resistance designed for outdoor applications. The grade is natural, in pellet forms.
Typical customer applications for Hifax EP 3080 G are non painted automotive bumpers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good UV Resistance
  • High Impact Resistance
 
Uses 
  • Automotive Bumper
  • Outdoor Applications
 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
    ISO 527-2
Yield
psi
 
Break
psi
 
Tensile Strain
    ISO 527-2
Yield
%
 
Break
%
 
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/1A
-4°F
ft·lb/in²
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Vicat Softening Temperature
°F
ISO 306/A
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel
Features
Features may also be described by the following terms: High Impact Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Available Documents
Processing - Extrusion (English)
Processing - Injection Molding (English)
Processing - Mold Shrink (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.