| Product Description | ||||
|
Umex products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic acid anhydride group as the functional group.
These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials. Polyolefin blended with the products excels in dispersibility of both pigments and fillers into resins and readily adheres to other materials including paint film. Moreover, the products exhibit excellent effects as a modifier for hot melt adhesives and asphalt. Umex CA60 (a product containing a dehydrating agent) is specially developed for compounding resins with moist fillers, such as pulp, wood flour, chaff, etc. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
|
Acid Number
|
|
|
JIS K0070 |
|
Molecular Weight
|
|
|
Internal Method |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Vicat Softening Temperature
|
|
°F
|
JIS K2531 |
| Fill Analysis |
Nominal Value
|
Unit
|
Test Method
|
|
Melt Viscosity (320°F)
|
|
mPa·s
|
ASTM D3236 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Umex 1001, Umex , Umex1001, 1001, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Sanyo Chemical , PolypropyleneUnspecified, PPUnspecified
|
|||
| Generic Name | |||
|
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
|
|||
| Features | |||
|
Features may also be described by the following terms: Low Molecular Weight, Low MW, Low Viscosity, Good Adhesion, Excellent Printability, Printable.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |