| Product Description | ||||
|
ECOPLUS™ 105 Degradable Polyethylene is a natural high density degradable polyethylene which is suitable for extrusion of a wide variety of film applications. ECOPLUS™ 105 Degradable Polyethylene is based on high density copolymer and it is supplied in pellet form.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Agency Ratings
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density 2
|
|
g/cm³
|
ISO 1872-1 |
|
Melt Mass-Flow Rate (MFR)
|
ISO 1133 | ||
|
190°C/2.16 kg
|
|
g/10 min
|
|
|
190°C/21.6 kg
|
|
g/10 min
|
|
| Films |
Nominal Value
|
Unit
|
Test Method
|
|
Film Thickness - Tested
|
|
mil
|
|
|
Tensile Stress
|
ISO 1184 | ||
|
MD: Yield
|
|
psi
|
|
|
TD: Yield
|
|
psi
|
|
|
MD
|
|
psi
|
|
|
TD
|
|
psi
|
|
|
Tensile Elongation
|
ISO 1184 | ||
|
MD: Break
|
|
%
|
|
|
TD: Break
|
|
%
|
|
|
Dart Drop Impact
|
|
g
|
ISO 7765-1 |
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Accelerated Weathering Duration - Degredation
|
|
month
|
ASTM D2565 |
|
Migration - of Chemicals 3
|
|
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: EcoPLUS™ 105, EcoPLUS 105, EcoPLUS™ , EcoPLUS, EcoPLUS105, 105, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PETRONAS, PolyethyleneHighDensity
|
|||
| Agency Ratings | |||
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
|
|||
| Extrusion |
Nominal Value
|
Unit
|
|
|
Cylinder Zone 1 Temp.
|
|
°F
|
|
|
Cylinder Zone 2 Temp.
|
|
°F
|
|
|
Cylinder Zone 3 Temp.
|
|
°F
|
|
|
Cylinder Zone 4 Temp.
|
|
°F
|
|
|
Cylinder Zone 5 Temp.
|
|
°F
|
|
|
Melt Temperature
|
|
°F
|
|
|
Die Temperature
|
|
°F
|
|
| Extrusion Notes | |||
|
Screen Pack: 40/80 mesh
Screw Compression Ratio: 2.5:1 to 3.5:1 |
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Annealed |
| 33% Acetic Acid, 10% Ethanol, Olive Oil |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |