IDES Prospector Already have an account? Login Here

KRATON® G1701 M Data Sheet

Styrene Ethylene Propylene Styrene Block Copolymer

Supplied by Kraton Polymers LLC

Home > Plastics > KRATON® > KRATON® G1701 M Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below.

  • Kraton G1701 MU - supplied as a powder.

Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  
Uses 
  • Adhesives
  • Coating Applications
  • Compounding
  • Footwear
  • Plastics Modification
  • Sealants
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Coating
  • Compounding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)
g/10 min
 ASTM D1238
Antioxidant Additive 2
%
 Internal Method
Polystyrene Content 3
%
 Internal Method
Total Extractables
%
 Internal Method
Viscosity 4 (212°F)
cSt
 Internal Method
Volatile Matter
%
 Internal Method
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 10 sec)
 
 ASTM D2240
Additional Information
Nominal Value
Unit
Test Method
Diblock Content
%
  
Styrene/Rubber ratio
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KRATON® G1701 M, KRATON G1701 M, KRATON® , KRATON, KRATONG1701M, G 1701 M, G1701 M, G1701, 1701M, G1701M, Styrene Ethylene Propylene Styrene Block Copolymer, SEPS, Thermoplastic Elastomer, TPE, StyreneEthylenePropyleneStyreneBlockCopolymer, ThermoplasticElastomer, 1701G
Uses
Uses may also be described by the following terms: Sanitary Products, Plastics Modification, Plastic Modification, Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
2Non-staining phenolic antioxidant
3Measured on the polymer before hydrogenation
4Kin,1.70%wt (ENJ404)
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.