Home > Plastics > Materials > Geon™ Vinyl Dry Blend > Geon™ Vinyl Dry Blend E6755 - Datasheet

Geon™ Vinyl Dry Blend E6755 Data Sheet

Rigid Polyvinyl Chloride

Supplied by PolyOne Corporation

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Geon™ Vinyl Dry Blend E6755 is a Rigid Polyvinyl Chloride product. It can be processed by extrusion or profile extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Dry Blend E6755 include automotive, construction applications and sheet.

Characteristics include:
  • Heat Resistant
  • Impact Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Thermal Stability
  • High Impact Resistance
 
Uses 
  • Automotive Interior Parts
  • Fencing & Decking
  • Profiles
  • Sheet
 
Forms 
  • Powder
Processing Method 
  • Extrusion
  • Profile Extrusion
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D1638
PVC Cell Classification
 
ASTM D1784
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
ASTM D638
Tensile Strength 2 (Yield)
psi
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Compression Molded)
ft·lb/in
ASTM D256A
Drop Impact Resistance
    ASTM D4226
73°F 3
in·lb/mil
 
73°F 4
in·lb/mil
 
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
ASTM D648
CLTE - Flow
in/in/°F
ASTM D696
Features
Features may also be described by the following terms: Good Thermal Stability, High Impact Resistance.
Uses
Uses may also be described by the following terms: Fencing & Decking, Fencing and Decking.
Available Documents
Technical Datasheet
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
3Procedure A, C.125 Dart
4Procedure B, C.125 Dart
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.