Home > Plastics > Materials > HiFill® > HiFill® PA12 GF50 L - Datasheet

HiFill® PA12 GF50 L Data Sheet

Polyamide 12

50% Glass Fiber

Supplied by Techmer Engineered Solutions

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
HiFill® PA12 GF50 L is a Polyamide 12 (Nylon 12) product filled with 50% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: lubricated.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber, 50% Filler by Weight
Additive 
  • Lubricant
Features 
  • Lubricated
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
ASTM D955
Water Absorption (24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
ASTM D256
Unnotched Izod Impact (0.125 in)
 
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
CLTE - Flow
in/in/°F
ASTM D696
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
ASTM D257
Dielectric Strength 2
V/mil
ASTM D149
Generic Name
Generic Name may also be described by the following terms: PA12.
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
2Method A (Short-Time)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.