Home > Plastics > Materials > Amodel® > Amodel® A-1130 FW - Datasheet

Amodel® A-1130 FW Data Sheet

Polyphthalamide

30% Glass Fiber

Supplied by Solvay Specialty Polymers

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Amodel® A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications.

  • Black: A-1130 FW BK 324
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Additive 
  • PTFE Lubricant
Features 
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Stiffness
  • Good Wear Resistance
  • High Strength
  • Low Friction
Uses 
  • Bearings
  • Bushings
  • Filters
  • Gears
 
RoHS Compliance 
Automotive Specifications 
 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature
°F
ISO 11357-3
Features
Features may also be described by the following terms: Low Friction, High Strength, Good Chemical Resistance, Chemical Resistant, Good Creep Resistance, Creep Resistant, Good Dimensional Stability, Dimensionally Stable, Good Stiffness, Good Wear Resistance, Wear Resistant.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ISO (1), ASTM (1).
Available Documents
Technical Datasheet
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.