Home > Plastics > Materials > Bakelite® > Bakelite® PF 6507 - Datasheet

Bakelite® PF 6507 Datasheet

Phenol Formaldehyde Resin

Glass Fiber

Supplied by Hexion Specialty Chemicals GmbH

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Bakelite® PF 6507 is a Phenol Formaldehyde Resin (PF) product filled with glass fiber. It is available in Europe.

Characteristics include:
  • Good Dimensional Stability
  • Heat Resistant
  • High Strength
  • Low Shrinkage
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber
Features 
  • Good Dimensional Stability
  • High Elasticity
  • High Heat Resistance
  • High Strength
  • Low Shrinkage
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent Density
g/cm³
ISO 60
Molding Shrinkage - Flow
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/5
Flexural Modulus
psi
ISO 178
Flexural Strength 2
psi
ISO 178
Compressive Stress - Flow
psi
ISO 604
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/2eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/2eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 961/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (1160 psi, Unannealed)
°F
ISO 75-2/C
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength (0.0394 in)
V/mil
IEC 60243-1
Relative Permittivity (100 Hz)
 
IEC 60250
Dissipation Factor (100 Hz)
 
IEC 60250
Additional Information
Post Shrinkage, ISO 2577, Injection molding, Flow, 168h, 110°C: 0.15%
Molding Shrinkage, ISO 2577, Flow, Injection molding: 0.15%
Maximum Application Temperature, IEC 60216-P1/ DIN IEC 216-T1, <50h²: 220°C
Maximum Application Temperature, IEC 60216-P1/ DIN IEC 216-T1, <20000h²: 165°C
Proof Track Index, IEC 60112/ DIN IEC 112, Test liquid A: 150 PTI
Water Absorption, ISO 62, 24h/23°C: 12 mg
Features
Features may also be described by the following terms: High Elasticity, Highly Elastic, High Strength, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage, High Heat Resistance.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.