Home > Plastics > Materials > Bayblend® > Bayblend® T85 XF - Datasheet

Bayblend® T85 XF Datasheet

Polycarbonate + ABS

Supplied by Bayer MaterialScience - Polycarbonates

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; better flow than T85.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
RoHS Compliance 
Automotive Specifications 
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage 2
    ISO 2577
Across Flow : 500°F, 0,118 in
%
 
Flow : 500°F, 0,118 in
%
 
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress
    ISO 527-2/50
Yield, 73°F
psi
 
Break, 73°F
psi
 
Tensile Strain
    ISO 527-2/50
Yield, 73°F
%
 
Break, 73°F
%
 
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/A
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
-22°F
 
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/B50
--
°F
ISO 306/B120
CLTE
    ISO 11359-2
Flow : 73 to 131°F
in/in/°F
 
Transverse : 73 to 131°F
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Electric Strength (73°F, 0,0394 in)
V/mil
IEC 60243-1
Relative Permittivity
    IEC 60250
73°F, 100 Hz
 
 
73°F, 1 MHz
 
 
Dissipation Factor
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,0335 in)
 
UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (500°F, 1000 sec^-1)
Pa·s
ISO 11443-A
Automotive Specifications
This plastic material has approval for 4 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (2), GM (2).
Available Documents
Technical Datasheet (Chinese (Traditional))
Technical Datasheet (Chinese)
Technical Datasheet (English)
Technical Datasheet (German)
Notes
1Typical properties: these are not to be construed as specifications.
2150x105x3 mm, 80°C MT
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.