Home > Plastics > Materials > VECTRA® > VECTRA® S475 - Datasheet

VECTRA® S475 Data Sheet

Liquid Crystal Polymer

30% Glass\Mineral

Supplied by Polyplastics Co., Ltd.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
VECTRA® 
S475
Ultra-High Heat Resistant, High T Stiffness, Low warpage
VECTRA® 
S475
Super High Flow, High heat Resistance and Low Warp for Thin Parts.

Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant
UL-Listing V-0 in natural and black at 0.15mm thickness per UL 94 flame testing.
Relative-Temperature-Index (RTI) according to UL 746B: electricals 130°C, mechanicals 130°C.

UL = Underwriters Laboratories (USA)
General VECTRA® 
S475
VECTRA® 
S475
Material Status 
  • Commercial: Active
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass\Mineral, 30% Filler by Weight
--
Features 
  • High Heat Resistance
  • High Stiffness
  • Low Warpage
  • Flame Retardant
  • High Flow
  • High Heat Resistance
  • Low Warpage
RoHS Compliance 
--
UL File Number 
  • E106764
--
Part Marking Code (ISO 11469)
  • >LCP-(MD+GF)30<
--
Resin ID (ISO 1043)
--
  • LCP
Physical VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
       
Across Flow
--
%
ISO 294-4
Flow
--
%
ISO 294-4
Across Flow : 0.0394 in 2
--
%
Internal Method
Flow : 0.0394 in 2
--
%
Internal Method
Water Absorption (73°F, 24 hr)
--
%
ISO 62
Mechanical VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Tensile Modulus
--
psi
ISO 527-2/1A/1
Tensile Stress
       
Break
--
psi
ISO 527-2/1A/5
--
--
psi
ASTM D638
Tensile Elongation
       
Break
--
%
ASTM D638
Break
--
%
ISO 527-2/1A/5
Flexural Modulus
      ISO 178
--
--
psi
 
73°F
--
psi
 
Flexural Strength
      ISO 178
--
--
psi
 
73°F
--
psi
 
Flexural Strain
--
%
ISO 178
Flexural Strain at Break
--
%
ISO 178
Impact VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179/1eA
--
--
ft·lb/in²
 
73°F
--
ft·lb/in²
 
Notched Izod Impact Strength (73°F)
--
ft·lb/in²
ISO 180/1A
Thermal VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Heat Deflection Temperature
       
264 psi, Unannealed
°F
ISO 75-2/A
1160 psi, Unannealed
--
°F
ISO 75-2/C
Melting Temperature 3
--
°F
ISO 11357-3
CLTE
      ISO 11359-2
Flow
--
in/in/°F
 
Transverse
--
in/in/°F
 
Electrical VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Volume Resistivity
--
ohm·cm
IEC 60093
Electric Strength
      IEC 60243-1
0.0394 in
--
V/mil
 
0.118 in
--
V/mil
 
Dielectric Constant
       
1 kHz
--
 
IEC 60250
1 MHz
--
 
IEC 60250
1 MHz
--
 
IEC 60250
2.05 GHz
--
 
Internal Method
Dissipation Factor
       
1 kHz
--
 
IEC 60250
1 MHz
 
IEC 60250
2.05 GHz
--
 
Internal Method
Arc Resistance
--
sec
 
Comparative Tracking Index
--
V
IEC 60112
Flammability VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Flame Rating
 
UL 94
Additional Information VECTRA® 
S475
VECTRA® 
S475
Unit
Test Method
Color Number
--
 
 
Related Terminology
VECTRA® 
S475
This supplier and product may also be known by these terms: WinTech Polymer Ltd.
Features
VECTRA® 
S475
Features may also be described by the following terms: High Heat Resistance, High Stiffness, Low Warpage, Low Warp.
VECTRA® 
S475
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Heat Resistance, Low Warpage, Low Warp.
Available Documents
VECTRA® 
S475
Technical Datasheet (English)
VECTRA® 
S475
Technical Datasheet - ISO (English)
Injection VECTRA® 
S475
VECTRA® 
S475
Unit
 
Drying Temperature
--
°F
 
Drying Time
--
hr
 
Suggested Max Moisture
--
%
 
Hopper Temperature
--
°F
 
Rear Temperature
--
°F
 
Middle Temperature
--
°F
 
Front Temperature
--
°F
 
Nozzle Temperature
--
°F
 
Processing (Melt) Temp
--
°F
 
Mold Temperature
--
°F
 
Injection Pressure
--
psi
 
Injection Rate
--
 
 
Holding Pressure
--
psi
 
Back Pressure
--
psi
 
Injection Notes
VECTRA® 
S475
Manifold Temperature: 355 to 370°C
Zone 4 Temperature: 355 to 370°C
Feed Temperature: 60 to 80°C
Notes
1Typical properties: these are not to be construed as specifications.
280x80x1 mm; Inj. Pressure 60MPa
310°C/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.