Home > Plastics > Materials > Perlex > Perlex R201 - Datasheet

Perlex R201 Data Sheet

Polycarbonate

Supplied by Perrite

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
Perlex R201 is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary attribute of Perlex R201: Flame Rated.

Typical application of Perlex R201: Electrical/Electronic Applications
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Flow
Uses 
  • Electrical Parts
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Area) (73°F)
ft·lb/in²
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0630 in)
 
UL 94
Glow Wire Ignition Temperature
    IEC 60695-2-13
0.0394 in
°F
 
0.0787 in
°F
 
0.118 in
°F
 
Features
Features may also be described by the following terms: Good Flow.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.