Home > Plastics > Materials > Formolene® > Formolene® 6535N - Datasheet

Formolene® 6535N Data Sheet

Polypropylene Impact Copolymer

Supplied by Formosa Plastics Corporation, U.S.A.

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Impact Copolymer Designed to Meet the Requirement of Automotive Interior Trim
Formolene® 6535N is a specially formulated, high impact copolymer of polypropylene designed for interior trim applications such as those described by Ford Motor Company's Specifications WSS-M4D638-A and WSS-M4D638-B. Formolene ® 6535N is suitable for many injection molding applications requiring toughness such as bins, crates, outdoor tools, machinery and toys. Material has been approved under GM-PP-033 and DCX MSB-500 for interior trim.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Impact Copolymer
Uses 
  • Automotive Interior Parts
  • Automotive Interior Trim
  • Crates
  • Industrial Applications
  • White Goods & Small Appliances
Agency Ratings 
Automotive Specifications 
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Molding Shrinkage
    ISO 2577
Across Flow : 176°F, 48 hr
%
 
Flow : 176°F, 48 hr
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
ASTM D638
Tensile Strain
     
Yield
%
ISO 527-2/50
Break, Injection Molded 2
%
ASTM D638
Flexural Modulus
     
1% Secant : Injection Molded 3
psi
ASTM D790
--
psi
ISO 178
Films
Nominal Value
Unit
Test Method
Tensile Strength
psi
ISO 527-3/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
-22°F, Injection Molded
ft·lb/in
ASTM D256
0°F, Injection Molded
ft·lb/in
ASTM D256
73°F, Injection Molded
ft·lb/in
ASTM D256
-40°F
ft·lb/in²
ISO 180
0°F
ft·lb/in²
ISO 180
73°F
ft·lb/in²
ISO 180
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     
Shore D, Injection Molded
 
ASTM D2240
--
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed, Injection Molded
°F
ASTM D648
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed, Injection Molded
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
CLTE - Flow
in/in/°F
ASTM D696
Features
Features may also be described by the following terms: Impact Copolymer, Good Stiffness, Good Impact Resistance.
Uses
Uses may also be described by the following terms: White Goods, Small Appliances, White Goods and Small Appliances, White Goods & Small Appliances.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (1).
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Available Documents
Processing - Film (English)
Processing - Injection Molding (English)
Processing - Sheet Extrusion (English)
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.