Home > Plastics > Materials > RTP > RTP PA6 15 GF 25 M BLK - Datasheet

RTP PA6 15 GF 25 M BLK Datasheet

Polyamide 6

15% Glass Fiber; 25% Mineral

Supplied by RTP Company

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Value Product - 15% Glass Fiber - 25% Mineral - Heat Stabilized
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 15% Filler by Weight
  • Mineral, 25% Filler by Weight
 
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow (0.126 in)
in/in
ASTM D955
Moisture Content
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength
psi
ASTM D638
Tensile Elongation (Yield)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
ASTM D256
Unnotched Izod Impact (0.126 in)
ft·lb/in
ASTM D4812
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0591 in, Values per RTP Company testing.)
 
UL 94
Additional Information
Nominal Value
Unit
Test Method
Primary Additive
%
 
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Available Documents
Brochure - Design Guide (English)
Processing - Comprehensive Molding Guide (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Dew Point
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Notes
Desiccant Type Dryer Required.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.