Home > Plastics > Materials > Lotrène® LDPE > Lotrène® LDPE FD0274 - Datasheet

Lotrène® LDPE FD0274 Datasheet

Low Density Polyethylene

Supplied by QAPCO

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Lotrène® LDPE FD0274 is a Low Density Polyethylene product. It can be processed by blown film or film extrusion and is available in Africa & Middle East or Europe. Applications of Lotrène® LDPE FD0274 include coating applications, film, food contact applications and packaging.

Characteristics include:
  • REACH Compliant
  • Antiblock
  • Clarity
  • Food Contact Acceptable
  • Good Dimensional Stability
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
 
Additive 
  • Antiblock
  • Slip
 
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Dimensional Stability
  • High Clarity
  • High Gloss
  • Slip
Uses 
  • Film
  • Food Packaging
  • Laminates
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Film Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Film Thickness - Recommended / Available
 
 
Tensile Strength
    ASTM D882
MD : Yield, 2.0 mil
psi
 
TD : Yield, 2.0 mil
psi
 
MD : Break, 2.0 mil
psi
 
TD : Break, 2.0 mil
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 2.0 mil
%
 
TD : Break, 2.0 mil
%
 
Dart Drop Impact 2 (2.0 mil)
g
ASTM D1709B
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Peak Crystallization Temperature (DSC)
°F
ASTM E794
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
ASTM D2457
Clarity (1.97 mil)
 
ASTM D1746
Haze (1.97 mil)
%
ASTM D1003
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Clarity, Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, High Gloss.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Available Documents
Technical Datasheet (English)
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2F50
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.