Home > Plastics > Materials > WPP PP > WPP PP PPH2UFO-UV DX9 Black - Datasheet

WPP PP PPH2UFO-UV DX9 Black Data Sheet

Polypropylene Homopolymer

Supplied by Washington Penn Plastic Co. Inc.

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
The properties shown below are typical for a polypropylene homopolymer. This basic product satisfies the needs of many applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Homopolymer
  • Medium Flow
 
Uses 
  • Automotive Applications
Automotive Specifications 
 
Appearance 
  • Black
  • Colors Available
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     
Yield 2
psi
ASTM D638
Yield
psi
ISO 527-2/50
Flexural Modulus
     
-- 3
psi
ASTM D790
-- 4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179
Multi-Axial Instrumented Impact Energy (73°F)
ft·lb
ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
Additional Information
Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (1).
Available Documents
Processing - Injection Molding (English)
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.50 in/min
40.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.