Home > Plastics > Materials > Luran® S > Luran® S 777K - Datasheet

Luran® S 777K Data Sheet

Acrylonitrile Styrene Acrylate

Supplied by Styrolution

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
Luran S 777K is considered as the standard injection molding grade within the Luran S portfolio offering a well-balanced property profile.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Flow
  • Good Processability
 
Uses 
  • Household Goods
  • Lawn and Garden Equipment
 
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Creep Modulus vs. Time (ISO 11403-1)
  • Isochronous Stress vs. Strain (ISO 11403-1)
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
    ISO 1133
200°C/21.6 kg
in³/10min
 
220°C/10.0 kg
in³/10min
 
Molding Shrinkage
%
ISO 294-4
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain (Yield, 73°F)
%
ISO 527-2
Tensile Creep Modulus
    ISO 899-1
1 hr
psi
 
1000 hr
psi
 
Flexural Strength
psi
ISO 178
Films
Nominal Value
Unit
Test Method
Tensile Elongation - MD (Break)
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact Strength
    ISO 180/A
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Annealed
°F
ISO 75-2/B
264 psi, Annealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
CLTE - Flow
in/in/°F
ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
DIN 52612
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant (100 Hz)
 
IEC 60250
Dissipation Factor
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Features
Features may also be described by the following terms: Good Flow, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (2).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Notes
Injection Velocity: 200 mm/s
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.