Home > Plastics > Materials > Ultramid® > Ultramid® B33 L - Datasheet

Ultramid® B33 L Datasheet

Polyamide 6

Supplied by BASF Corporation

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
Ultramid® B33 L is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Lubricant (500 ppm)
Features 
  • Lubricated
  • Medium Viscosity
  • Oil Resistant
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Film
  • Monofilaments
 
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent Density
g/cm³
ISO 60
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Viscosity Number (H2SO4 (Sulphuric Acid))
cm³/g
ISO 307
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
ISO 3146
Additional Information
Density, ISO 1183: 1.12 to 1.15 g/cm³
Extractables, ISO 6427, chips not ground/16h: 0.5%
Film Grade, BASF Method: 1 to 3 mm²/kg
Lubricant, BASF Method: 350 to 650 mg/kg
Moisture Content, ISO 15512: 0.06%
Pellet Shape: Round
Pellet Size: 2 to 2.5 mm
Relative Viscosity, 1% (m/v) in 96% (m/m) sulfuric acid, ISO 307: 3.19 to 3.41
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Medium Viscosity.
Uses
Uses may also be described by the following terms: Cast Film, Monofilaments, Monofilament, Bi-axially Oriented Film, Biaxially Oriented Film.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1), EU (1), FDA (1).
Available Documents
Processing - Injection Molding (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.